The influence of pulse-plasma treatment on the phase composition and hardness of Fe-TiB2-CrB2 coatings
https://doi.org/10.32523/ejpfm.2021050209
Abstract
This work are presented the research results of pulse plasma treatment influence on the phase composition, hardness, roughness and element composition of coatings on the bases of Fe-TiB2-CrB2. The Fe-TiB2-CrB2 coatingwas depositedby detonation method. The following pulse-plasmatreatment was used to modify the structure and properties of the surface layers of the sprayed coating. The results of mechanical experiments showed that the hardness of Fe-TiB2-CrB2 coating increased after the treatment. On the basis of the X-ray analysis, it has been established that the increase of coating hardness is connected with phase transformations in a surface layer, in particular, with formation of oxide phases and increase of carbide particles quantity.
About the Authors
A. B. Kengesbekov
S. Amanzholov East Kazakhstan University
Kazakhstan
Kazakhstan
B. K. Rakhadilov
S. Amanzholov East Kazakhstan University
Kazakhstan
Kazakhstan
Yu. N. Tyurin
E.O. Paton Electric Welding Institute
Ukraine
Ukraine
N. M. Magazov
S. Amanzholov East Kazakhstan University
Kazakhstan
Kazakhstan
M. K. Kylyshkanov
JSC UMP
Kazakhstan
Kazakhstan
Zh. B. Sagdoldina
S. Amanzholov East Kazakhstan University
Kazakhstan
Kazakhstan
References
1. O.V. Maksakova et al., Materials Research Express 6(10) (2019) 106438.
2. B. Rakhadilov et al., Coatings 11(2) (2021) 1-14, 218.
3. V.E. Panarin et al., Aviacionno-kosmicheskaya tekhnika i tekhnologiya 6 (2016) 15-20. (in Russian)
4. M. Pashechko et al., Lubelskie Towarzystwo Naukowe (2001) 379-387.
5. M. Pashechko et al., Zeszyty Budowa Maszyn (2009) 125-127.
6. A.K. Shurin et al., Metallovedenie i termicheskaja obrabotka metallov 8 (1977) 53-55. (in Russian)
7. M.V. Kindrachuk et al., Metallovedenie i obrabotka metallov 1 (1995) 38-45. (in Russian)
8. B. Dastan et al., Key Engineering Materials 839 (2020) 137-143.
9. Lei Guo et al., Journal of Advanced Ceramics 9(2) (2020) 232-242.
10. M. Skakov et al., Key Engineering Materials 531-532 (2013) 627-631.
11. Yu.N. Tyurin and O.V. Kolisnichenko, The Open Surface Science Journal 1 (2009) 13-19.
12. M.G. Kovaleva et al., Journal of Nano- and Electronic Physics 10(6) (2018) 06035-1-06035-4.
13. D.N. Kakimzhanov et al., Eurasian Journal of Physics and Functional Materials 5(1) (2021) 45-51.
14. V.A. Okovityj et al., Vestnik Belorusskogo nacional’nogo tekhnicheskogo universiteta: nauchno-tekhnicheskij zhurnal 5 (2009) 38-43. (in Russian)
15. A. Kumar et al., Materials Today: Proceedings 39(4) (2021) 1291-1295.
16. V.E. Panarin, Aviacionno-kosmicheskaya tekhnika i tekhnologiya 8 (2014) 108-112. (in Russian)
Review
For citations:
Kengesbekov A.B., Rakhadilov B.K., Tyurin Yu.N., Magazov N.M., Kylyshkanov M.K., Sagdoldina Zh.B. The influence of pulse-plasma treatment on the phase composition and hardness of Fe-TiB2-CrB2 coatings. Eurasian Journal of Physics and Functional Materials. 2021;5(2):155-162. https://doi.org/10.32523/ejpfm.2021050209
Views: 432
Email this article 