Neutron-physical parameters at the outlet of the WWR-K reactor beam tube
https://doi.org/10.29317/ejpfm.2019030303
Abstract
The paper is devoted to the neutron-physical parameters obtained via combined calculations and experimental measurements for the exit of the WWR-K reactor beam tube. The experimentally measured values of the thermal and fast neutron flux densities at the exit comprise 9.6 × 108 and 8.4 × 107 cm-2 s-1 , respectively. The dose rate of gamma-emission is 30 Sv/h. The obtained parameters will be used in designing of the collimation and screening systems of the installation for radiography and tomography to be created at the beam tube #1.
About the Authors
A. B. Bauyrzhan
The LLC «Semizbay-U»
Kazakhstan
Kazakhstan
S. N. Koltochnik
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
M. T. Aitkulov
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
D. S. Dyussambayev
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
A. A. Shaimerdenov
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
B. .. Mukhametuly
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
N. T. Burtebaev
The RSE «INP» under ME RK
Kazakhstan
Kazakhstan
References
1. S.N. Koltochnik et al., Vestnik NYATC RK 4 (2018) 14.
2. F.M. Arinkin et al., Atomic energy 123(1) (2017) 15.
3. A.A. Shaimerdenov et al., Physics of Atomic Nuclei 81(10) (2018) 1408.
4. B. Mukhametuly et al., Proceedings of 11 th World Conference on Neutron Radiography, Sydney (2018) 43.
5. A. Shaimerdenov et al., Proceedings of International conference RRFM-2019, Jordan (2019) 131.
6. X-5 Monte Carlo Team, MCNP - A General Monte Carlo N-Particle Transport Code, Version 5 - Volume II: User’s Guide, Los Alamos National Laboratory report LA-CP-03-0245 (April 2003, revised 2/1/2008).
7. M.B. Chadwick et al., Nucl. Data Sheets 112 (2011) 2887.
Review
For citations:
Bauyrzhan A.B., Koltochnik S.N., Aitkulov M.T., Dyussambayev D.S., Shaimerdenov A.A., Mukhametuly B..., Burtebaev N.T. Neutron-physical parameters at the outlet of the WWR-K reactor beam tube. Eurasian Journal of Physics and Functional Materials. 2019;3(3):219-225. https://doi.org/10.29317/ejpfm.2019030303
Views: 408
Email this article 