Preview

Eurasian Journal of Physics and Functional Materials

Advanced search

Synthesis of boride-titanium coatings by magnetron sputtering of composite targetss

https://doi.org/10.29317/ejpfm.2018020306

Abstract

The paper presents the results of investigations of the structure and phase composition of titanium boride coatings deposited by magnetron sputtering from a target of a complex composition onto a steel substrate. The target for magnetron sputtering was obtained by sintering boron carbide and titanium powders. The structure and elemental composition of the coating were studied using X-ray diffractometry (XRD), scanning electron microscopy (SEM) and the energy-dispersive spectral (EDS). It was established that the coatin g structure is a mixture of Ti2B5 and TiB12 phases with the total boron content of ≈ 80 at %, which is 4 times higher than the boron concentration in the coatings obtained by plasma spraying of the B4C powder. The use of magnetron sputtered coatings of titanium boride coatings as neutron-absorbing materials will allow to reduce the coating thickness in comparison with the coatings from boron carbide synthesized by plasma spraying methods.

About the Authors

A. S. Larionov
Institute of Nuclear Physics
Kazakhstan


E. A. Zhakanbaeyev
Institute of Nuclear Physics
Kazakhstan


A. L. Kozlovski
Institute of Nuclear Physics
Kazakhstan


A. S. Dikov
Institute of Nuclear Physics
Kazakhstan


S. B. Kislitsin
Institute of Nuclear Physics
Kazakhstan


L. V. Chekushina
Institute of Nuclear Physics
Kazakhstan


References

1. N.S. Tsebakovskaya et al., Survey of Foreign Practices of SNF and RW Disposal (Komtehprint, Moscow, 2015) 208 p.

2. Licensing Requirements for the Independent Storage of Spent Nuclear Fuel, High-Level Radioactive Waste and Reactor-Related Greater Than Class C Waste. 10 CFR Part 72 - 2006 Energy.

3. J.S. Choi et al., Applications of Neutron-Absorbing Structural-Amorphous Metal (SAM) Coatings for Criticality Safety Controls of Used Fuel Storage, Transportation, and Disposal. ICNC 2015 Charlotte, NC, United States September 13-17, 2015.

4. J-S. Choi et al., Materials Science & Technology 2007 Conference and Exhibition Detroit, MI, United States (2007).

5. J. Choi et al., 2006 MRS Fall Meeting Boston, MA (2006) UCRL-CONF-226122.

6. C.M.T. Sanchez et al., Surface & Coatings Technology 205 (2011) 3698.

7. S.V. Denbnovetsky, Technology and design in electronic equipment 6 (2002).

8. N.S. Boltovets et al., Tech. Phys. 48(4) (2003) 441.


Review

For citations:


Larionov A.S., Zhakanbaeyev E.A., Kozlovski A.L., Dikov A.S., Kislitsin S.B., Chekushina L.V. Synthesis of boride-titanium coatings by magnetron sputtering of composite targetss. Eurasian Journal of Physics and Functional Materials. 2018;2(3):251-258. https://doi.org/10.29317/ejpfm.2018020306

Views: 407


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2522-9869 (Print)
ISSN 2616-8537 (Online)